PLA
Commodity
A rigid, low-warp polymer for clear, fast iteration when the part is not highly loaded.
Stocked, datasheet on file
Choose the part’s material by its job
Start with what the part must do, not a filament name. A working indoor enclosure, a flexible strain relief, and an exterior mount need different material decisions even when the geometry is similar.
Use the quick picks and filters to make a shortlist, then send the service environment and the part itself. We will recommend the final material after review.
Start with the part’s job
Narrow the catalogue
27 of 27 shown
Family
Availability
Heated chamber
Property
PLA Matte
Commodity
A low-gloss PLA grade for parts where the surface should read as intentional rather than shiny.
Stocked
PLA Tough
Commodity
A tougher PLA formulation for prototypes that need more give than standard PLA.
Stocked
PETG
Commodity
A balanced engineering-adjacent plastic for functional parts that need more toughness than PLA.
Stocked, datasheet on file
PETG-HF
Commodity
A PETG grade formulated for faster deposition when time in the machine is part of the decision.
Stocked
TPU 95A
Commodity
A firm flexible polyurethane for protective, gripping, and vibration-isolating parts.
Stocked
TPU 90A
Commodity
A softer TPU for compliant interfaces, grips, and parts that must deform more readily.
Stocked
TPU 85A
Commodity
A very soft TPU for highly compliant parts where flexibility is the primary requirement.
Stocked
PVA
Commodity
A water-soluble support material for enclosed geometry in compatible low-temperature builds.
Stocked
BVOH
Commodity
A water-soluble support material for compatible low-temperature parts with difficult internal geometry.
Stocked
ABS
Engineering
A robust engineering plastic for functional parts that need more heat resistance than commodity grades.
StockedChamber required
ASA
Engineering
An outdoor-facing engineering plastic for parts exposed to weather and sunlight.
StockedChamber required
PC
Engineering
A tough, heat-capable engineering plastic for demanding functional components.
StockedChamber required
PC-FR
Engineering
A specialised PC grade considered only after the application’s documented requirements are reviewed.
StockedChamber required
PA6
Engineering
A nylon engineering plastic for tough, wear-prone parts that benefit from controlled processing.
StockedChamber required
PET
Engineering
A polyester engineering material for stable functional parts where processing is selected to suit the job.
StockedChamber required
PLA-CF
Fibre-reinforced
A carbon-fibre-filled PLA for stiff, stable prototypes with a restrained surface finish.
Stocked, datasheet on file
PETG-CF
Fibre-reinforced
A carbon-fibre-filled PETG for stiff, functional parts with PETG’s practical toughness.
Stocked
ABS-GF
Fibre-reinforced
A glass-fibre-filled ABS for stiffer engineering parts that still need an ABS-style process.
StockedChamber required
ASA-CF
Fibre-reinforced
A carbon-fibre-filled ASA for stiff exterior-facing engineering parts.
StockedChamber required
PA6-CF
Fibre-reinforced
A carbon-fibre-filled nylon for stiff, tough engineering components and production fixtures.
StockedChamber required
PA6-GF
Fibre-reinforced
A glass-fibre-filled nylon for rigid, durable engineering parts with a stable functional shape.
StockedChamber required
PAHT-CF
Fibre-reinforced
A high-temperature carbon-fibre nylon for demanding stiff parts in elevated-heat environments.
StockedChamber required
PET-CF
Fibre-reinforced
A carbon-fibre-filled PET for stable, stiff functional components with chemical-resistance priorities.
StockedChamber required
PPA-CF
High performance
A carbon-fibre-filled high-performance polyamide for demanding heat and chemical environments.
StockedChamber required
PPS
High performance
A high-performance polymer for specialised parts with demanding heat or chemical exposure.
StockedChamber required
PPS-CF
High performance
A carbon-fibre-filled PPS for the stiffest specialist parts in demanding environments.
StockedChamber required