A carbon-fibre-filled PET for stable, stiff functional components with chemical-resistance priorities.
PET-CF
What it’s for
Jigs and fixtures, Test fixtures, Bench tooling, Short-run production, Brackets and mounts, Chemical exposure, Short-run production. We choose the final route against the geometry and service environment, not from the material name alone.
Key characteristics
- 01Carbon fibre reinforces the PET matrix and limits its movement.
- 02That provides a stable, stiff shape for functional parts.
- 03It needs dry material, controlled heat, and a hardened nozzle.
- 04Use it for fixtures, brackets, and production-oriented parts.
In our shop
We choose PET-CF when the application calls for PET’s material behaviour alongside fibre stiffness.
It is sourced against a defined requirement, then run on a qualified setup.
Relative profile
These are relative positions within this catalogue, not material-property measurements.
- Stiffness
- Toughness
- Heat resistance
- Chemical resistance
- Printability
- Cost
Printing notes
- Minimum nozzle
- 0.4 mm or larger
- Hardened nozzle
- Required
- Heated chamber
- Required
- Drying
- Required before printing
Design notes
- Share the intended chemical exposure for review.
- Use continuous load paths rather than isolated thin tabs.
Technical values appear only after we approve a datasheet for the exact spool in use. If a specific property determines the job, tell us and we will discuss the material route.