A carbon-fibre-filled PPS for the stiffest specialist parts in demanding environments.
PPS-CF
High performanceStocked
What it’s for
Chemical exposure, Jigs and fixtures, Brackets and mounts, Short-run production. We choose the final route against the geometry and service environment, not from the material name alone.
Key characteristics
- 01Carbon fibre reinforces PPS’s high-performance polymer matrix.
- 02That produces a very stiff shape for demanding functional geometry.
- 03It needs dry material, a controlled chamber process, and a hardened nozzle.
- 04Use it for assessed high-heat fixtures, mounts, and chemical-exposure parts.
In our shop
We source PPS-CF against a real service requirement, never for a generic material upgrade.
Every build starts with the material condition and part geometry, then we decide whether it is the right route.
Relative profile
These are relative positions within this catalogue, not material-property measurements.
- Stiffness
- Toughness
- Heat resistance
- Chemical resistance
- Printability
- Cost
Printing notes
- Minimum nozzle
- 0.4 mm or larger
- Hardened nozzle
- Required
- Heated chamber
- Required
- Drying
- Required before printing
Design notes
- Specify the actual environment before we source this grade.
- Use broad load paths and allow for a hardened-nozzle feature scale.
Technical values appear only after we approve a datasheet for the exact spool in use. If a specific property determines the job, tell us and we will discuss the material route.
Applications
Chemical exposureJigs and fixturesBrackets and mountsShort-run production
StiffHeat resistantChemically resistant