A glass-fibre-filled nylon for rigid, durable engineering parts with a stable functional shape.
PA6-GF
What it’s for
Jigs and fixtures, Test fixtures, Bench tooling, Short-run production, Brackets and mounts, Ducting, Replacement parts. We choose the final route against the geometry and service environment, not from the material name alone.
Key characteristics
- 01Glass fibres reinforce PA6 and limit movement in the nylon matrix.
- 02That favours stiffness for loaded components.
- 03It requires drying, a held chamber, and a hardened nozzle.
- 04Use it for motor mounts, ducts, fixtures, and brackets.
In our shop
We use PA6-GF when a nylon part needs to stay especially rigid under its working loads.
It gets the same dry-material discipline and geometry review as the other fibre nylons.
Relative profile
These are relative positions within this catalogue, not material-property measurements.
- Stiffness
- Toughness
- Heat resistance
- Chemical resistance
- Printability
- Cost
Printing notes
- Minimum nozzle
- 0.4 mm or larger
- Hardened nozzle
- Required
- Heated chamber
- Required
- Drying
- Required before printing
Design notes
- Use it where rigidity matters more than a compliant snap feature.
- Share mating-part loads before we choose the orientation.
Technical values appear only after we approve a datasheet for the exact spool in use. If a specific property determines the job, tell us and we will discuss the material route.