A high-temperature carbon-fibre nylon for demanding stiff parts in elevated-heat environments.
PAHT-CF
What it’s for
Ducting, Brackets and mounts, Chemical exposure, Jigs and fixtures, Test fixtures, Bench tooling, Short-run production, Brackets and mounts. We choose the final route against the geometry and service environment, not from the material name alone.
Key characteristics
- 01Its high-temperature nylon base is reinforced with carbon fibre.
- 02That combines stiffness with greater heat capability than ordinary nylon.
- 03It needs dry handling, a chamber, and a hardened nozzle.
- 04Use it for high-duty fixtures, mounts, and under-hood-style components.
In our shop
We source PAHT-CF only once the environment and load case justify its process overhead.
It is a material where geometry, drying, and orientation all deserve the same attention.
Relative profile
These are relative positions within this catalogue, not material-property measurements.
- Stiffness
- Toughness
- Heat resistance
- Chemical resistance
- Printability
- Cost
Printing notes
- Minimum nozzle
- 0.4 mm or larger
- Hardened nozzle
- Required
- Heated chamber
- Required
- Drying
- Required before printing
Design notes
- Specify the service environment before selecting this material.
- Avoid sharp stress risers and detail below the hardened nozzle’s practical range.
Technical values appear only after we approve a datasheet for the exact spool in use. If a specific property determines the job, tell us and we will discuss the material route.